Haier HCI604TPB3, Instruction Manual

Page: 28 / 58

Using your Induction Cooktop
To start cooking
1. Touch the ON/OFF control.
After power on, the buzzer beeps once, all displays show
“ – “ or “ – – “, indicating that the cooktop has entered
into standby mode.
2. Place a suitable pan on the cooking zone that
you wish to use.
• Make sure the bottom of the pan and the surface
of the cooking zone are clean and dry.
3. Touch the heating zone selection control, and
the indicator next to the key will flash.
4. Set a power level by touching the “ - ” or “ + ” control or slide along the slider.
a. If you don’t select a heat zone within 1 minute, the cooktop will
automatically switch off. You will need to start again at step 1.
b. You can modify the heat setting at any time during cooking.
Note:
HCI604TPB3 is limited to 4.5kW and using two or more cooking zones at once can
limit the maximum heat setting for each zone.
When you reach the maximum available heat setting for a selected zone, the
setting will flash, and you will not be able to increase any more.
Or