Haier HCI604TG3, Instruction Manual

Page: 17 / 57

Fastening the cooktop to the bench
1. Place the cooktop on a soft and stable surface, you can use the packaging.
2. Mount the supplied brackets (B) and tighten the screws (A) onto the cooktop, as
shown in below image.
3. Before installing the cooktop into the cutout, follow the steps on the next page
to connect the cooktop to the mains power supply.
4. After connecting the cooktop to mains power, flip the cooktop and place it into
the cutout.
CAUTION: While pressing the unit into the cutout, please pay attention to use the
top surface of glass rather than the edges to avoid your fingers getting trapped
in between the glass and the benchtop.
Notes:
1.
Foam seal is already applied on the perimeter of glass bottom surface, it's not
part of the packaging, please do not remove .
2. Minimum benchtop thickness required is 18 mm for the retaining bracket to
function properly.
A B C D
Screw Retaining
bracket Screw hole Chassis