8
1. Remove the packing materials and the packing straps
Take down all the packing material and packing straps used for transportation.
2.Check the appendix with the refrigerator
According to the packing list contents to check items in the package box.If there is any discrepancy,
please contact the after-sales service in time.
3.Placement condition
• Leave a gap of at least 10cm around the storage box
to ensure good circulation of the surrounding air and
facilitate the removal of heat.
• In order to ensure the normal opening of the door, a
space of 80cm shall be left above the top.
NOTE: Suffi cient space shall be reserved at the grid of
the engine room (at least 20 cm to the wall surface) to
make it more convient for maintenance And ventilation.
4. Installation of handle
a.Take out the handle;
b.The lower part of the handle is aligned with the threaded hole on the door cover;
c.Make sure the hook on the lock nose and the box body can correctly fi t;
d.Tighten the fastening screws in turn;
e.Tighten the handle cover and tighten the bottom screw .
• Before unpacking the package, the refrigerator can be transported with forklift or clip
charter. If using forklift, It shall insert under the wood support plate of the refrigerator
from front or back side and move the refrigerator. If using clip charter, It shall clip from
under the wood support plate and only clip the side face of the refrigerator.
• After removing the package, please strengthen the protection to avoid from hurting
the foot when carrying the refrigerator or needing to change the position.
• The inclination angle of the refrigerator shall not be greater than 45 ° during
transporting.
• Put the package plastic bag away from the children.
Over 80cm to the top
more than 25cm to the right
more than
15cm to
the left
more than
15cm to
the behind
