Haier H2R465SF, User Manual

Page: 18 / 253

4.16 Energy saving tips
Make sure the appliance is properly ventilated (see INSTALLATION).
Do not install the appliance in direct sunlight or in the near of heat sources (e.g.
stoves, heaters).
Avoid unnecessarily low temperature in the appliance. The energy consumption in
-
creases the lower the temperature in the appliance is set.
Allow warm food to cool down before placing it in the appliance.
Make sure the door always closes correctly and unimpaired by food position. Keep
door gasket clean.
Defreeze frozen food in a fridge.
Clean the
The most energy-saving configuration requires drawer, food box and shelves to be
positioned in the appliance on factory-fresh condition, and food to be placed without
blocking the air outlet of the duct.
rear of the appliance regularly. Dust increases energy consumption.
5.1 Removable door shelves
The door shelves can be removed for cleaning:
Place hands on each side of the shelf, lift it upwards (1)
and pull it out (2)(Fig. 5.1).
In order to insert the door shelf, the above steps are
carried out in reverse order.
5.2 Glass shelves
1.
edge (1) and pulling it out (2) (Fig. 5.2).
2.
To reinstall it, put it on the lugs on both sides and
push it to the most rearward position until the rear
1
2
1
5.1
5.2
4-Use
5-Equipment
17
EN
To take out a shelf, remove it by first uplifting its hind
.