English
English
Washer is Making Noise
• Washer may need to be reinstalled. (Check washer installation section.)
• Washer load may need to be re-balanced, as the load may be uneven.
• Coins, loose change, buttons or other heavy objects could make noise (read
Operation Guide – Normal Operating Sounds.)
• Squealing Sounds: Due to overloaded wash tub.
• Vibration Noises: Due to not leveling washer properly on the floor and uneven
distribution of clothes in the tub.
Problems with Clothes
• Clothes are too wrinkled: this is due to improper sorting, overloading and
washing in very hot water repeatedly. Avoid overloading and resort your
load. Do not mix heavy clothes such as work clothes with light clothes such as
blouses, light shirts and delicate items. You may need to wash in warm or cold
water.
• Have soap residue: detergent may not be dissolving in water. Check water
temperature or you need to add detergent as wash tub is being filled with
water before you load your clothes to avoid soap residue on clothes.
• Spots or stains on your clothes: this is due to incorrect use of fabric softener.
You may need to read proper instructions on the container and follow proper
manufacturer’s directions for using the softener.
• Clothes are grayed or yellowed: this is due to not pouring enough detergent for
large loads. You may have to add more detergent to the load.
• Clothes are ripped and have holes/excessive wear and tear: this is due to
sharp objects such as pins and belt buckles You will need to remove small
loose sharp objects. Fasten belts, zippers, metal snaps etc. Check if you are
using undiluted bleach. Never add undiluted bleach to wash.
Notes: GWT950AW Only
Trouble Codes
Reason
LD
The draining does not work, or the speed of draining is too slow
UL
The washer is out of balance
LF
The water inlet time exceeds the preset time (40 minutes)
E6
The water level sensor fault - Call service
F2
Water overflow protection
20