background image

Timed-Dry Cycles Button: (8)

Auto-Dry Cycles Button: (9)

More Time & Less Time Button: (7)

"Auto-Dry cycles" button will let you select your desired dry cycl es. For your 
convenience, there are seven fabric care dry cycles programmed in 
this mode:Normal, Heavy , Cotton,Bulky Items,  Casual, Delicate ,Touch 
Up and Customer. 

"Timed-Dry Cycles" button will let you select your desired dr y mode.

Timed Dry: 

you can set status of "Temp", "Signal"  and dry time 

with "More Time" and "Less Time" buttons by yourself.

Rack Dry:

 the program used to dry article like sport shoes.

Set time from 0 to 180 minute when 

Timed Dry

 or

Rack Dry

cycle selected.

Normal drying

Big clothes drying like jeans

Drying bulky clothing

Normal

Heavy

Cotton

Bulky Items

Casual

Delicate

Touch Up

Custom

Wrinkle Saver Button: (6)

This convenient feature lets you delay the start of the dry cycle between 3 to 
24 hours.  Press the "Wrinkle Saver" to choose the number of hours you want to 
delay the start of the cycle.
If no delay, the wrinkle saver  indicator is off and remaining time indicator is on.
The nixie display indicates remaining time of non-reserved program.
If setting "Wrinkle Saver" in standby status, the nixie display indicates 3 hr, which 
will increase by 1 hr with each pressing (until 24 and return to 3). If keep 
pressed for 1.5 s, nixie display indicated value will increase continuously.

5

Sensor Dry Level Button: (5)

Used to set drying time of auto-programs. If no auto-program is selected, 
pressing the button is inactive and will get alarms.

The drying program defined by user himself and stored. 

Special drying for cotton clothes 

Drying small quantity clothes and delicates 

Drying casual everyday clothes

Used to select wrinkle-remove  function

Summary of Contents for Ginesis HLF103Q





























Reviews: