– 59 –
The two port diverter is the key component which
allows low water use, by alternating water to the
lower spray arm or mid spray arm, bottle wash
(some models) and upper spray system.
The lower portion of the diverter is molded into
the sump. Shown below is the bottom side of the
diverter top. Notice the bypass notch in the upper
spray system port.
Operation
• The “bypass” allows water to bypass the
check ball in the diverter as described in the
next step. The dishwasher is in off or standby
mode, no pump operation. The check ball is
at the bottom of the diverter.
Bypass
Main Conduit Port (upper spray system)
Lower Spray Arm Port
Clamp Removal Tip
: Use a small screw-driver
inserted into the ear of the clamp and move the
handle back and forth to loosen the clamp. The
clamp can be removed and discarded when the
component is removed. The clamp kit (
Part #
:
WD02X25470) contains a single clamp for the
diverter connection.
Two Port Diverter
