![Haier GDE480BW User Manual Download Page 8](http://html.mh-extra.com/html/haier/gde480bw/gde480bw_user-manual_135813008.webp)
6
INSTALLATION INSTRUCTIONS
WARNING
Risk of Fire
Clothes dryer installation must be performed by a qualified installer.
Install the clothes dryer according to the manufacturer's instructions
and local codes.
To reduce the risk of severe injury or death, follow all installation
instructions.
TOOLS NEEDED
•
Phillips
Screwdriver
•
Flat-Blade
Screwdriver
•
Channel-Lock Adjustable Pliers
•
½" Open-End Wrench
•
Carpenter’s
Level
•
Measuring Tape (12 ft. [3.7 m] min.)
For gas installations only:
•
Pipe
Wrench
•
2 Adjustable Wrenches
ADDITIONAL PARTS REQUIRED
•
4" (10.2 cm) Rigid or Flexible Metal Exhaust Ducting
•
Vent
Clamps
•
Duct
Tape
•
Power Cord (US Electric Dryer Only)
-
A power supply cord kit must be purchased to meet local electrical codes.
The dryer must use a 3 or 4-wire NEMA 14-30 or 10-30 type SRDT or ST
(as required) power supply cord rated at 120/240 volt AC minimum,
30 amp, with 3 open-end spade lug connectors with upturned ends or
closed loop connectors and marked for use with clothes dryers.
-
UL Listed Strain Relief
•
Gas Hookup Parts (Gas Dryer Only)
-
⅜
" NPT Elbow
-
⅜
" NPT Flare Adapter Fitting
-
⅜
" Flexible Gas Connector
-
Pipe-Joint
Compound
•
Mobile Home Installation Kit (Gas Dryer for Mobile Home Only)