2
English
Features Diagram
PART NAMES
1
2
3
4
5
1. Fan Head
2. Tilt Adjustment Knob
3. Power Switch
4. Nut
5. Fan Base
Assembly Instructions
• Carefully remove your fan from the box. (Please save the carton for off-season storage.)
• Assemble the fan head to the fan base by screwing the tilt adjustment knob to the nut tightly.
Operating Instructions
• Place the fan on a dry, level surface.
• Make sure the power switch is in the OFF position.
• Plug the power cord into a standard 120V AC, 60 Hz outlet.
• To turn on the fan, slide the switch to the desired speed (HI or LOW)
• To adjust the fan tilt:
a) Loosen the Tilt Adjustment Knob.
b) Adjust the tilt to the desired angle.
c) Securely tighten the Tilt Adjustment Knob.
• To turn off the fan, slide the switch to the OFF position
• Unplug the product from the electrical outlet when it is not in use or
when left unattended.
Cleaning and Maintenance Instructions
WARNING!
Do not attempt to repair or adjust any electrical or mechanical functions on this unit. Doing so
will void the warranty.
• Before cleaning, be sure to turn off and unplug the unit.
• Keep the fan clean. Carefully wipe the unit with a soft, damp cloth. Please be
very cautious near the motor.
• DO NOT immerse the fan in water and never allow water to drip into the
motor housing.
• Never use gasoline, benzene or thinner to clean the unit. This will damage the surface of the unit.
• After cleaning, be sure to completely dry the unit with a cloth or towel.
