Haier ESA3105 - MANUAL 2, User Manual

Page: 18 / 24

1. Remove the screws which fasten
the cabinet at both sides and at
the back.
2. Slide the unit from the cabinet
by gripping the base pan handle
and pulling forward while bracing
the cabinet.
3. Insert the Frame Guide into the
bottom of the cabinet.
Caution: Never expose plastic
front or grille to extreme
temperatures.
PREPARE UNIT
FOR
INSTALLATION-2
2
Shipping
Screws
Install top rail with three 13/32"screws.
Slide left-hand curtain assembly
into left end of top and bottom
rails. Repeat for right-hand curtain
assembly. Fasten curtain retainer
strips to sides of outer case with
eight 13/32" screws.
ASSEMBLE
CURTAINS/TOP
RAIL
3
English
Inspect window track, sash, and sill
for its ability to support the weight of
air conditioner.
Measure width between window
moldings to ensure Instant Mount
will fit window frame. Instant Mount
models are designed for windows
wide (the detail see page 15)
Instant Mount kit supplied with unit
is designed for mounting in most
double-hung windows without
storm windows. For installation in
window frame with storm window,
modify sill by adding wood strips (not
included) to inner and outer sills. This
raises unit and eliminates
interference of storm window frame.
Mobile home window installation
Add wood strip (at least1 1/2" wide)
along entire width of window sill.
Thicknessof wood strip shouldmatch
height of front lip on window frame.
Fastenwood strip to sill with a
minimum of threecountersunkwood
screws(not suppliedwith kit). This
providesa smooth surface for
mounting air conditioner. Storm window installation
If stormwindow frame does not allow
adequate clearancebelow sill (1/2"
required), remove stormwindow
frame or createclearanceby adding a
wood strip (at least1 1/2" wide) along
entire width of sill. Fastenwood strip
to sill with at leastthreecountersunk
wood screws(not suppliedwith kit).
Thisprovidesa smooth surface for
mounting air conditioner.
SI LL
W ood
Str ip
1/2"
Min imum
O
U
T
D
O
O
R
St orm Wi ndo w
Fram e
1 1/2"
Min imum
I
N
D
O
O
R
1 1/ 2"
Minimum
W ood
St rip
I
N
D
O
O
R
O
U
T
D
O
O
R
Window
Frame
Mus tbe a mini mum
of 1/2" to c l ear
botto m rail on unit
PREPARE
WINDOW FOR
INSTALLTION
4