11
Model No:
ES15V-Q1(R)
Issue
Rev.
Nov.
2014
A
3.Servicing Procedures
3.1 Remove the shell.
Before maintenance, the shell should be removed.
Firstly, take off the red and blue rings; then remove four screws, after that the shell can be
removed,
Attention to the snap joint, Don’t break them.
Unfold
the
shell
Remove
the
foam
cushion
3.2
Change
Temperature
Controller
(thermostat)
1. Remove the knob
2. Remove two screws and remove
temperature controller
Join screw
Temperature control Knob
Remove the screws
