Haier E48E91NCDLH62NZ Service Manual Download Page 14

Page: 14 / 58

TV USB port can be used to view JPEG photos, play mp3 music and Video files,and read text present in USB

devices.

Entering to USB Media

Press USB key on remote to get USB Media menu as shown above

Or Press the

Source

key and

keys on remote and select USB source to get USB Media menu as shown

above.

Select the

Media type (Photo/ Music/ Movie/ Text)

to be viewed and press

key to enter into USB Media

and When USB drive is detected by the TV, USB drive is displayed as a folder on the screen as shown below.

Press OK key to view subfolder or files in the USB drive.

Note:

* Files of selected Media type can only be viewed through USB. Media type can be any one amoung Photo /

Music / Movie / Text.

After entering the multimedia file selection interface, press the

Menu

button allows you to execute the following

control functions:

1. [Sort]: Sort the multimedia files according to Date or Name.

2. [Media Type]: Select the multimedia file type to playback.

3. [Thumbnail Size]: Select the size of the multimedia file thumbnail.

4. [Copy]: Select the multimedia files to copy.

5. [Paste]: Paste the copied multimedia file.

6. [Delete]: Delete the selected multimedia file.

Viewing Photos

1. Thumbnail of the available images will be displayed on the screen. If no images are displayed then select the

folder containing the Photos.

2. Select particular image and press OK key to display it in full screen.

Slide show starts automatically when image is viewed in full screen.

Press

key to play/ pause slideshow. Press

PAGE-

PAGE+

to view previous or next image.

Summary of Contents for E48E91NCDLH62NZ



























































Search results

Summary of Contents for E48E91NCDLH62NZ

Reviews:

Related manuals for E48E91NCDLH62NZ

Brands by name

Popular brands

Haier E48E91NCDLH62NZ, Service Manual

Search results

Summary of Contents for E48E91NCDLH62NZ

Reviews:

Related manuals for E48E91NCDLH62NZ

Brands by name

Popular brands