C
lose the door, the delayed start indicator “
G
” blinks , the time-remaining indicator “
F
” will blink and
decrease, the programme will start until the delayed start indicator “
G
” goes out .
23
en
Press programme button
“ B ”
t
o choose the desired programme.
D
elayed start programming
Y
ou can delay the start of a programme in increments of 1 hour up to 24 hours.
Switch dishwasher
O
N
.
Immediately press the Delayed Start button “
G
”, the delayed start indicator lights, the delayed start
time indicator “
F
” changes to “ ”.
Press the Delayed Start button “
G
” as many times as necessary until the numerical display shows
the required delay.
To cancel the time delay setting, pressing the Delayed Start button until the delayed start indicator
goes out.
1
/2 Load Button
T
his button “H” (see" Close-up View (Control Panel) ) makes it possible to wash dishes using only the
upper rack if there are not enough dishes for a full load. This will allow you to save on water and energy
consumption.
T
o select 1/2 load:
S
elect the programme ( see the paragraph entitled“ Switching the dishwaher ON”)
Press the 1/2 load button “
H
” , 1/2 load indicator lights.
If the door is closed, the programme starts automatically.
To cancel the 1/2 load, press programme button
“
B ”
a
nd hold it in for about 3 seconds.
A
F
G
I
H
B
- Please keep in mind that the amount of detergent should also be adapted to the 1/2 load.