background image

.1.

NOTICE

Carefully read the instructions contained in this manual, as they

provide important information which is essential to safe and proper

installation, use and maintenance of the appliance.

     

This appliance complies with the following EEC

directives:

-73/23/EEC of 19/02/73(Low Voltage)and subsequent

modifications;

-   8 9 / 3 3 6 / E E C   o f   0 3 / 0 5 / 8 9   ( E l e c t r o m a g n e t i c

Compatibility) and subsequent modifications.

- Carefully dispose of the packing material.

- After removing the packing, check to make sure that the appli-

  ance is not damaged. If  in doubt, contact a qualified professional.

- The dishwasher must only be used by adults for the washing of

  household dishes and cooking utensils.

- The appliance is not intended for use by young children or

  inform persons without supervision.

- Young children should be supervised to ensure that they do

  not play with the appliance.

- Keep detergents out of the reach of children, who must also

  be kept away from the dishwasher when it is open.

- This appliance cannot be installed outdoors, not even if the

  area in which it is installed is covered by a roof; it is also very

  dangerous to leave it exposed to the rain and elements.

- Do not touch the heating element during or after a wash cycle.

- Do not lean or sit on the door when it is open, as this could

  over turn the dishwasher.

- If the appliance malfunctions, turn off the water supply to the

  appliance and disconnect the plug from the wall socket. Then,

  consult the section entitled, "Troubleshooting." If you cannot

  solve the problem, contact an authorised service agent.

- Only authorised service agents can make repairs.

- Appliances which are no longer being used must be made

  inoperable by cutting the power supply cord and removing

  the door lock.

- If the supply cord is damaged, it must be replaced by a special

  cord or assembly available from the manufacturer or its ser-

  vice agent.

- After installation, the power plug must be accessible.

- Fundamental rules to follow when using the appliance:

* Never touch the dishwasher when barefoot or with wet hands

  or feet;

* We discourage the use of extension cords and multiple sockets;

* During installation, the power supply cord must not be exces-

   sively or dangerously bent or flattened;

* If the appliance is not operating properly or maintenance must

  be performed, disconnect the appliance from the power supply.

To maintain the EFFICIENCY and SAFETY of this appliance,

we recommend:

- call only the Service Centers authorized  by the manufacturer.

- always use original Spare Parts

Close-up View (control panel)

A

B

C

D

E

F

ON-OFF Light

ON-OFF Button

Low Salt Indicator Light

Low Rinse Aid Indicator Light

G

H

I

J

K

L

Cycle select button

1/2 load indicator light

Handle For Opening Door

GB

1/2 load Button

B

A

C

D

E

F

H

G

I

J

K

L

R

DW12-BFE SS

ON

OFF

Delay Timer

S TA RT

S

1
2

Delay select Button

Display delay time

Cycle indicator light

Start/Pause button

Safety Is a Good Habit to Get Into

Summary of Contents for DW12-BFE SS













Reviews: