24
Once you have reset to a new wash cycle, you must refill the detergent
compartment if it is open and empty because the detergent from previous
wash cycle may have already been released.
Follow the steps below to cancel or reset a wash cycle:
1) To cancel or reset a wash cycle, press "POWER" button to "OFF" position
to turn the dishwasher off. You will notice that the power indicator
display light shuts off.
2) If you need to reselect "HI-TEMP WASH" option, you must select it now
by pressing the "HI-TEMP WASH" button before selecting the wash cycle.
Note: "HI-TEMP WASH" option cannot be selected with "RINSE & HOLD"
cycle.
3) To reset a wash cycle, turn the knob "Clockwise" to your desired wash
cycle setting.
4) Press "POWER" button again to the "ON" position to turn the dishwasher
on. You will hear a "Click" that signifies the automatic start of the wash
process. You will also notice that power indicator display light turns on.
10.5 Pausing a Wash Cycle
The "POWER" button serves the purpose of the "Pause" function as well as
powering the machine on or off.
If you need to pause in the middle of the cycle to add or remove any
items, follow the steps below:
1) Press "POWER" button to the "OFF" position to pause the cycle. You will
notice that the power indicator display light shuts off.
2) Open the door by squeezing the door latch slowly.
Note: Do not open the door until the water spray action stops. Be
careful of moist hot air that may rise out of the dishwasher.
3) Add or remove items. Once you have finished adding or removing,
simply close the door properly.
4) Press the "POWER" button to the "ON" position to resume the cycle. You
will notice that power indicator display light turns on.
11 MAINTENANCES SERVICES AND TROUBLESHOOTING
11.1 Maintenances Services
It may occur that the dishwasher does not function or does not function
properly. Before calling for assistance, let us see what can be done first:
have you forgotten to press one of the buttons or to perform an essential
operation?
Summary of Contents for DW-8888-08
Page 9: ...9 3 Put in detergent 4 End of cycle 5 Weekly maintenance ...
Page 10: ...10 ...
Page 31: ...31 Y 12 CIRCUIT DIAGRAM ...
