Haier DW-40W100, Instruction Manual

Page: 9 / 10

Comparaed the setvalue(SA) needed inside the storage,the hige
temperature alarm temperature=SA+AH; the low temperature
Alarm temperature=SA
-AL.If the setvalue is -25
to-15 someone want to change the
hige temperature alarm temperature from -20 to -15 and
thelow temperature alarm temperature from -30 to 35
Please follow the steps below:
Because the alarming parameter is
Or (down) key
the
the
the
the
the
for more than
5 seconds to access the Parame
-ter
The present temperature
inside the storage
Display PS and flash “ ”
Until display AH “ ”
10
Until display AL ” “
10
AH
The present temperature
inside the storage
0