23
Error code failure system
If your appliance senses that it is not operating correctly, then an error
code may appear in the LCD display.
Some of the error codes can possibly be remedied by the customer
and the steps outlined below should be followed.
BEFORE
COMPLETING
ANY
MAINTAINEANCE
ON
THE
APPLIANCE, IT SHOULD BE DISCONNECTED FROM YOUR MAINS
POWER SUPPLY.
Err1
o
Door is not shut properly
You should regularly check to see if any deposits have formed, or
there are any foreign bodies in the rubber door gasket. This sits
inside the opening of the porthole door.
Err2
o
Drainage error, water has not emptied within 4 minutes.
Clean the drain pump filter and check that the outlet hose is not
blocked or kinked.
Err3
o
Temperature sensor short circuit or open circuit.
Contact the Advice Line.
Err4
o
Machine does not fill to the specified level within 8 minutes.
Check that the inlet hose is not kinked or blocked and that the
water tap the machine is connected to is fully open.
Err5
o
Machine has filled to an abnormal level.
Contact the Advice Line.
Err7
o
Motor error
Contact the Advice Line.
Summary of Contents for BYWR1206
Page 14: ...14 ...
