background image

   

 

SERVICE MANUAL

Model: BD-103GAA 

5

Issue  2009-12-17 

Rev.  

Ref0912S015V0

 

supply line when moves the machine from the wall.   

12. In the case of leakage of inflammable gases like carbon monoxide, open the door and windows. Don’t 

pull out or insert the plugs of the appliance. 

13. Don’t touch the refrigeration surface of the freezing compartment when the refrigerator is in operation, 

especially when your hand is wet, else you may be glued to the surface. 

14. Pull out the plug of power supply during clearance or power outage. Wait at least five minutes to 

resume the power supply in order to prevent damage to the compressor caused by continuous restart. 

  Photo used in this manual 

The illustration and photos used in this Manual may not base on the final design of products, which 

may differ from your products in some way. 

1-3. How to read this Service Manual 

1-3-1. Using Icons 

The meaning of each icon is described in the table below: 

Note:     

 

 

A “note” provides information that is not indispensable. 

Caution:  

 

 

A “caution” is used when there is danger, that through incorrect manipulation, may damage 

equipment, loose data, get an unexpected result or has to restart (part of) a procedure.

 

Warning:  

 

  A “warning” is used when there is danger of personal injury. 

Reference: 

   

A “reference” guides us to other places in this binder or in this manual, where we will find additional 

information on a specific topic. 

 

 

Summary of Contents for BD-103GAA























Reviews: