background image

6

Usage preparation

 Remove all package parts

Including foam base and the adhesive tape fixing
accessories, they all must be removed. Take
care to take away the adhesive tape on the back
for fixing cover plate of compressor.

C h e c k   a c c o m p a n y i n g
accessories and document

Check the items inside the package box with the
packaging list, and inquire selling shop, if any
discrepancy.

Place the refrigerator on proper
position

(See the above section "place surrounding")

It  is  advisable  to  carry  out
cleaning prior to usage

(See latter section "cleaning" for its detailed
description)

In order to facilitate inquiry, copy the refrigerator model and package number located on
the back nameplate in the guarantee certificate.

 Idle standing

After the appliance has been adjusted level, and
cleaned, let it remain idle for at least 30 minutes
before switching it on so as to ensure its normal
running.

7

Putting food in the refrigerator

After some time of switching on, the interior of
the refrigerator shall be completely cooled. Then
foodstuff can be put inside to start regularly
usage of the appliance.

Connection of power supply

When the refrigerator is firstly operated, connect
the refrigerator 6 hours after the refrigerator is
located. Start the refrigerator 5 minutes later
after the power failure.

Begin to use

When changing the temperature setting position, it shall take some time for the internal
temperature to reach balance. And the length of this balancing time varies with degree of
the change in the temperature setting, the degree of ambient temperature, door-opening
frequency, and the amount of food stored.

Temperature  setting

Temperature in the refrigerator is controlled and
adjusted by the thermostat in the refrigerator
compartment. If the position "off" is selected, the
cooling system is inactivated with the power
connected.  It  is  recommended  to  set  the
thermostat to the position "Medium" or cooler.
Set the refrigerator to the position "Low" in
summers.

Recommended

position

Ambient temperature≥32℃

Ambient temperature25~32℃

Ambient temperature16~25℃

Ambient temperature10~16℃

Ambient temperature〈10℃

Using occasion

Weak

Strong

Weak

Strong

Weak

Strong

Weak

Strong

Weak

Strong

Weak

Strong

Summary of Contents for BCD-509W













Reviews: