1.
Loosen the lug slightly and remove the lampshade. (Step 1)
2.
Remove the U lamp tube from the holder. (Step 2)
3.
Place a new lamp tube to the holder. (Step 3)
4.
Replace the lampshade. (Step 4)
Troubleshooting
Cabinet does not operate.
z
Verify if the cabinet is properly plugged in.
z
Verify if the power is supplied.
Inside temperature appears too high.
z
Frequent door openings.
z
Short storage period
z
Verify if the gaskets is in good condition
z
The condenser coils need cleaning.
z
Verify if the thermostat is properly adjusted.
Wine temperature is too cold.
z
Verify if temperature control setting is too cold.
Cabinet runs too frequently.
z
This may be normal to maintain constant temperature during high temperature and
humid days.
z
Doors may have been opened frequently or for an extended period of time.
z
Clean condenser coils.
z
Check gasket for proper seal.
z
Check to see if doors are completely closed.
Moisture buildup on interior or exterior of the cabinet.
z
This is normal during high humidity periods.
z
Prolonged or frequent door openings.
z
Check door gaskets for proper seal.
Cabinet door does not shut properly.
z
Level the cabinet.
z
Check for blockages e.g. beverage bottles, shelves.