Haier AS20S2SF1FA, Operation Manual

Page: 5 / 217

Operation
Clock set
Note:
Note:
The distance between the signal transmission head and
the receiver hole should be within 7m without any obstacle
change-over wireless telephone is installed in the type
in receiving the signals, so the distance to the indoor unit
should be shorter.
Full display or unclear display during operation indicates the
batteries have been used up. Please change batteries.
If the remote controller can’t run normally during operation,
please remove the batteries and reload several minutes later
.
Hint:
Remove the batteries in case unit won’t be in usage for
a long period.
20. SMART button
special heating set
function: 10 degree
heating maintaining
(valuable for RS)
18. button TIMER
23. SWING up/down button
24. SWING left/right button
19. button CLOCK
26. HEALTH AIRFLOW button
21. HEALTH button
28. CODE button
A-b yard
29. APPLY button
30. 10°C button
25. SLEEP button
22.
27. LIGHT button
Control the lightening and
extinguishing of the indoor
LED display board.
Press CLOCK button,
Press “+” or “-” to set
correct time.
Each press will increase or
decrease 1min. If the button is
kept pressed, time will change
quickly.
press APPLY, “TIME”
starts
1
2
3
2
1. Press ““HEALTH AIRFLOW” simultaneously can
set and cancel the “LOCK” function ( )
FAN MODE button
19
20
21
22
23 24
25
26
27
28
29
30
18
FAN MODE
FAN MODE
working.
SMART
10 ℃
SMART
10
℃