TrOuBLESHOOTING GuIdE
Problems are sometimes caused by simple “faults” that can be easily
corrected with or without the help of a service technician by first checking
a few basic remedies. The following can be helpful for diagnosis of the
problem and solution:
Appliance does not operate
• Is the power supply cut off? Check another electrical appliance at the electrical
outlet, or check fuse on the back of the unit. If needed, replace the fuse with a
250V 8AMP.
Note: Remove power cord from outlet before replacing fuse.
Cooling efficiency is poor
• Check if the unit is placed close to stove or heater. Place the unit away from
these heat sources.
• Check if the unit is placed close to wall. leave some space between the back
of the unit and the wall.
• Are there any unnecessary objects around the unit? Remove all the objects.
• Check if the ambient temperature is too high. Regulate the ambient
temperature properly.
Heating efficiency is poor
• Check if the heater switch is set to the “off” position. Set the switch to “oN.”
• Check if the ambient temperature is too low. Regulate the ambient
temperature properly.
Generates abnormal noises
• Is the appliance placed on an uneven floor? Position the appliance on a firm
and even surface.
• Is there an obstacle at the back of the appliance? Remove the obstacle.
Pump does not work
• If front door is not closed, the pump will not operate. Please make sure
door is closed.
Drinking water does not flow well
• Check if the water tank is empty. Make sure that the pump operates properly
and that the water bottle has enough water.
• Check if the water flow pipe and the lever are clean and unblocked.
Clean the pipe and the lever.
10
English
English
