background image

Lock Setup

           Lock Set

PassWord
Tuning Lock               Off
Preset Prog.              Off
Prog. Num                   1
Source Lock               
Child Lock                  Off
Max Volume              100
UnLock

Change Password

The password can be changed. Press CH+/- button and select 

 Password. Press VOL+/-  or ENTER button, the screen will display  

Old Pw.----, which will stay on the screen if a wrong password 

is entered. If correct password is entered, the screen  will 

display New Pw.----. Then enter the new password, and the screen will display 

Confirm----. If the same password is entered correctly twice, the old password will be changed. If the same password 

is not correctly entered twice, the screen will display New Pw.----, then you have to reenter the password. 

Note:

The initial password is 0000, and the security default password is 9443. If Unlock is activated, the password 

setup cannot be changed. 

Lock Menu Options

Lock Menu Options

Press LOCK button on remote control, Password will appear on the screen. If password is correctly entered, the Lock set menu will be 

menu willl be  entered. If the password is not correctly entered, you will be required to reenter the password and the cursor will stay 

At the first place. Press EXIT to erase the window. If time you set in OSD menu expires after the latest press, MENU

will disappear automatically.

- The TV has the function of security default lock. Password needs to be entered when the program lock mode is to be set.

Press 

CH+/-

 to select Tuning Lock and 

VOL+/-

 to set On/Off.  (To set On, some operation such as search will be 

not available. When enter the SYS. menu, Tuner Lock will be on the screen, and the time will be the same with 

the main menu if no operation. If you want to operate SYS. menu, you need to enter the Lock menu to set Tuning 

Lock Off or operate UnLock.

Tuning Lock

Preset Prog.

Preset Prog. is opted for setting up start signal resource. Press CH+/-

 

 button to select Preset Prog. Press  VOL+/-

 button, sources can be swapped in TV/AV1/SVideo/YPbPr/VGA/DVI/Off mode. After setup, the set mode will be 

entered if  the 

TV is switched off and on again.     

entered if the 

Owner s Manual   27

Summary of Contents for 42EP24STV

































Reviews: