Haier 29T9D, Service Manual, Page: 24 / 73

24
I. Surround/woofer , mute and NICAM functions
MENU
CH+
CH-
VOL- VOL+
3
2
1
How to use surround / woofer
2 Press the CH+/- buttons
select "SURROUND" /
"WOOFER", then press the
VOL-/+ buttons to turn the
SURROUND / WOOFER "ON".
MUTE
Sound mute
1 Press the MUTE button on the
remote control and "MUTE" type
face will display on the lower part
of the screen. At this time, the
sound of the TV set is turned off.
SOUND
MUTE
16
Selecting NICAM & Mono modes
I-II
SOUND
VOLUME 45
BASS 48
TREBLE 48
BALANCE 0
WOOFER OFF
WOOFER VOL 20
SURROUND ON
3 Press the CH+/- buttons
select WOOFER VOL, then
press the VOL-/+ buttons to
obtain the desired effect.
This TV set is fitted with a Stereo Nicam decoder which
allows full high quality stereo sound, plus the standard
FM mono sound to be received. By pressing the I-II
button on the remote control enables the TV set to sound
to be switched between Nicam and Mono reception.
If the broadcaster is transmitting Bilingual sound service
the I-II button on the remote control will allow up to 3
separate languages to be selected.
Note: If the signal is very weak or has too much
interference such as ghosting the TV set will not be able
to receive the NICAM signal.
Program Diagram