background image

BASIC FEATURE

TECHNICAL SPECIFICATION

Pure flat CRT

218 programs stored

Auto-correcting black balance

Surround stereo 

Blue extension,Green improvement

Multi-picture modes and multi-audio modes

Fast teletext

Audio/Video input, S-Video input

Double SCARTS

POWER SUPPLY:                                  See rating plate

TV SYSTEM:                                         B/G  D/K    

COLOUR SYSTEM:                              PAL  SECAM  NTSC3.58/4.43 (AV)

CRT:                                                        29"

AERIAL INPUT IMPEDANCE:           75

Ω

 unbalanced

VIDEO INPUT:                                      1.0VP-P(75

Ω

)

AUDIO INPUT:                                      436mVrms(40K

Ω

)

VIDEO OUTPUT:                                   1.0VP-P(75

Ω

)

AUDIO OUTPUT:                                   436mVrms(

600

Ω

)

AUDIO MAX OUTPUT POWER:        5W+5W

POWER CONSUMPTION:                    See rating plate

NET WEIGHT(kg):                                 29F9B           46

                                                                  29T9B          44

NET SIZE(mm):                                      810

×

530

×

600

Supplied accessories:

Infrared remote control handset              1

Battery(AA)                                              2

Operating instructions                              1

Design and specifications are subject to change without notice.

WARNING AND CAUTIONS

1. When you clean the TV set, please pull 
out the power plug from AC outlet.
Or  may  result  in  electric  shock,  fire  or 
damage  to  the  TV  set.  Don't    clean  the   
cabinet  and  the    screen    with  benzene, 
petrol and other chemicals.

4. Do not place the TV set  near  rain 
or  moisture  as  it  may  cause  an  electric 
shock, or the TV set to catch fire. The  TV  
set 
must only be used 
in dry indoor 
location.

2. 

In order to prolong the using life of  the 

TV set, please place it in a well ventilated 
location.

5. The back cover must only be removed 
by a registered electrical service person. 
Removing  the  back  cover  may  result  in 
electric shock, fire or damage to
the TV set.

3. 

Don't  place  the 

TV  set  in  direct 
sunlight  or  near 
heat source.

6. If the TV set is not going to be used for 
long time, or there is a severe thunder & 
lightening storm, it is recommended that 
the TV set be disconnected from the AC 
power outlet and the aerial plug 
removed.

Explanation on the display tube

Should  the  picture tube require cleaning, disconnect the power and use a dry 
soft cotton cloth. Do not use any cleaner or abrasive cloth.

1

2

Summary of Contents for 29F9B












Reviews: