GENERAL OPERATION
11
12
6.Recall (On-screen Display)
The CALL button on the remote controller allows the on screen menu to be
displayed, showing the channel numbers and colour system and sound system.
7.Program scan (Automatically increments/scans the channels and displays
each channel for a short time.)
The SCAN button on the remote controller turns on/off the scan feature.
8.Channel swap (toggles between the last channel view and the current
channel)
Each time the SWAP button is pressed, the last channel view is displayed.
GENERAL OPERATION
9.AV input selection
Each time the TV/AV button is pressed, the input selection will cycle among
TV- AV- SVHS- DVD- TV.
Notes: I.Back AV & SVHS share the same back AV audio input.
Ⅱ
.In AV modes the RECALL status display will only display the colour
system.
III
.
Back AV and side AV can not be used at the same time, the back AV
has priority when you use.
1.Channel changing (218 possible channels)
Use either the CH+/- buttons on the remote controller or the front panel of the TV set
to change the channels. Or directly enter the channel number with the numeric button
on the remote controller.
2.Volume adjustment
Press the VOL+/- buttons on the remote controller or the front of the TV set to adjust
the volume level. The range is 0~100. When the volume buttons are pressed, the
volume level is displayed automatically on the TV screen.
3.Standby
Using the remote controller the TV set can be placed into standby mode.
A red standby light will glow on the TV front panel when the TV
set is placed into standby. To turn the TV set back on again, press standby button
on the remote controller again. It will take a few seconds before a picture is
displayed.
4.Mute
Press the MUTE button on the remote controller to mute the TV set’s sound. Pressing
the MUTE button again will turn the sound back on.
5.Preset picture modes
Our engineers have designed in 5 commonly used picture settings to allow fast
picture level selection depending on what type of TV program is showing. Each
mode is selected in turn by pressing the "P. STD" button on the remote controller.
The 5 modes are:
Listen- This is a new feature that blacks out the TV screen when listening to
music only channels.
Soft - Designed for night time low light viewing.
Standard - Designed for rooms that have good all round lighting.
Rich - Designed for rooms with high ambient lighting such as daytime sport.
User- A spare setting that can be adjusted to personal tastes.
All the 5 modes can be independently adjusted by using the PICTURE
adjustment menu.
Press repeatedly the [-/--] button to select the appropriate number of digits for
the next program number that you want to watch. The on screen indication will
change sequentially between one digit (-) for 0 to 9, two digits (- -) for 10 to
99 and 3 digits (- - -) for 100 to 218 input selection. After selecting the number
of digits, simply press the numeric keys for the desired program number. For
example, to select program 34, press the button [- / - -] until the on screen
indication shows (- -), then press 3 and finally 4.
Standby
mode must be used when the timer has been set to turn on the television
automatically.