background image

 3

BASIC FEATURE

I C bus control

218 programs stored

Display full functions on the screen  and infrared remote control

Multi picture modes and  sound modes  selection

Auto searching, function selecting and program number skipping

Multi function timer

Programs scanning

Game, multi-function lock

Stage curtain for open and close effect

2

TECHNICAL SPECIFICATION

1.POWER SUPPLY:                        See rating plate
2.COLOUR SYSTEM:                    PAL    SECAM      N

  TSC4.43/3.58(AV)

3.AUDIO SYSTEM:                       B/G      D/K   
4.CRT:                                             21"
5.ANTENNA INPUT :                   75

Ω

 Standard Coaxial Cable

6.SOUND OUTPUT POWER:       3W
7.POWER CONSUMPTION:         See rating plate
8.NET WEIGHT(kg):                       2

  0.5       

9.NET DIMENSION(mm):             5 82 x

   3 90 x

   459

Supplied accessories:
Infrared remote control handset            1 
Battery(AA)                                          2
Operating instruction                            1
Design and specifications are subject to change without notice.

2

Figure A

Figure B

Antenna cable
with a plug

Figure C

Figure D

 Antenna feeder

 Antenna adapter

 75-300

Ω

Coaxial cable(75

Ω

)       twin-lead cable(300

Ω

)

Antenna   connection
Connect an antenna to the antenna socket on
the TV set, we recommend using a Cable TV
system for better picture and audio quality.
1.If you use a coaxial cable(75

Ω

),insert the 

   antenna plug (see figure C) into 75

Ω

socket

   (see figure A).
2.If you use a twin-lead cable(300

Ω

),please

   shape the cable as figure D, and connect the 
   leads to antenna adapter and then insert the
   antenna adapter into the 75

Ω

socket(see

   figure B).

Power source wire connection
Insert the power plug into AC outlet.
Install and replace batteries of the 
remote control unit:
1.Place the remote control unit with the face
   down, then  open the battery cover of the 
   unit.
2.Place the two"AA"size batteries, matching 
   the + and - signs on each battery to the +
   and -signs of the battery compartment.
3.Close the cover of the battery compartment.
NOTE:
(1)Don't drop or wet or dismantle the unit.
(2)If you don't intend to use the unit for a 
     long period or the electricity of the 
     batteries is used up, remove the batteries
     to prevent batteries acid from leaking 
     into the battery compartment.
(3)Replace the two old batteries at the 
     same time.
(4)Don't use charge battery (Ni-cd )and 
     don't mix battery type.
(5)Don't throw your batteries into a fire. 
     Dispose of your batteries in a required 
     place.

PREPARING FOR OPERATIONS 

3

Antenna

Summary of Contents for 21FV6H-A8











Reviews: