TIME
CLOCK --:--
ON TIME --:--
ON-PROG 1
OFF TIME --:--
SLEEP TIMER --:--
REMIND TIME --:--
REMIND PROG 1
MULTI FUNCTION TIMER
9
10
Multi Function Timer
The TV set has in built a comprehensive timer
that has five basic functions.
1.Clock
2.On time so that the TV set can be programmed
to turn on at a certain time.
3.Off time to allow the TV set to turn off at a
preset time.
4.Sleep timer to allow the TV set to turn off after
10 ~ 180 minutes.
5.Program remind timer, that displays an on-
screen reminder prompt, when a program on a
different channel is due to start.
Selecting the clock menu
Press the MENU button four times until the CLOCK menu is displayed or press
the yellow time button on the remote controller.
1. Clock (master timer clock)
Press the CH+/- buttons to select CLOCK, then press the VOL+/- buttons to
adjust the hour. Press The P- buttons to select minute and the VOL +/- buttons to
adjust the minute.
2. On Time
Press the CH+/- buttons to select ON TIME, then press the VOL+/- buttons to
adjust the hour .Press the P- button to select minutes and the VOL+/- buttons to
adjust the minutes. Press the P- button to select ON-PROG and the VOL+/- buttons
to select the TV channel that the TV set will automatically turn on to.
3. Off Time
Press the CH+/- buttons to select OFF TIME, then press the VOL+/- buttons to
adjust the hour. Press the P- button to select minute and the VOL+/- buttons to
adjust the minute.
4. Sleep Timer
Press the CH+/- buttons to select SLEEP TIMER, then press the VOL+ button
Note: The clock will only work in the TV set if left turned on or in standby.
When the set is disconnect from the power supply or is turned off by the
main power switch on the front panel, the clock looses power and will
need to be reset when the power is reconnected.
EXCHANGE
PROGRAM 1 1
PROGRAM 2 1
EXCHANGE
MULTI FUNCTION TIMER
to adjust the amount of time before the TV set will automatically
turn off. Each time the VOL+ button is pressed the sleep time will increases by 10
minutes. The maximum sleep time is 180 minutes.
5. Remind Time
Press the CH+/- buttons to select REMIND TIME, then press the VOL+/- buttons to
adjust the hour.
Press the CH- button to select minute and the VOL +/- buttons to adjust the minute.
Press the CH- button to select REMIND PROG and the VOL +/- buttons to select the TV
channel that the TV set will automatically remind you to turn to while watching
another channel.
Program Number Exchange
This feature enables TV programs that
may be on a wrong TV channel number
to be swapped/exchanged. This feature
is very useful when Automatic Search
Tuning has been used, to reallocate the
found programs to the correct channel
numbers.
Press the MENU button 6 times until the
exchange menu is displayed.
Press the CH+/- buttons until program 1 is
selected. Use the VOL+/- buttons to
select the channel number to be swapped.
(I.E If you wish to exchange channel 2
and 4 PROGRAM 1 should = 2.)
Press the CH+/- buttons until program 2 is
selected. Use the VOL+/- buttons to
select the channel number to be swapped.
(I.E If you wish to exchange channel 2
And 4 PROGRAM 2 should = 4.)
Press the CH+/- buttons until EXCHANGE is
selected. Press the VOL+ button to
enable the exchange.
