ALL RIGHTS RESERVED HAIBRAIN B.V. © 15
1.
Installation Steps
Drill a hole refer to the dimension, put the screw rubber plug in, then
fix the rainproof cover on the wall by screws.
Connect the charging line according to the wiring diagram (the hole
for wire getting through suggested 16 ~ 30mm), if charging line comes
from indoor, lead the charging line pass through the hole, if charging
line comes from outdoor
，
lead the charging line pass through the
bottom of rainproof cover and connect the line
Install rechargeable lithium battery (BP-6M) to outdoor unit, the unit
starts up automatically.
Put the top part of outdoor unit into the rainproof cover like the
picture, push the bottom part, make sure its steady and fix it from the
bottom by screw, then fit on the screw cover.
