HAI OMNI II, Installation Manual

Page: 48 / 68

Page 42
BUTTONS 25-32 AREAS:
1 2 0=CLR
↕
BUTTONS 33-40 AREAS:
1 2 0=CLR
↕
BUTTONS
41-48 AREAS:
1 2 0=CLR
↕
BUTTONS 49-56 AREAS:
1 2 0=CLR
↕
BUTTONS
57-64 AREAS:
1 2 0=CLR
↑
SETUP AREAS: CONSOLES
To assign consoles to areas, from the Setup Areas menu, press the 4 (CONS) key.
Each console must be assigned to one and only one area. A console may be set to global, which allows it to access areas other
than its assigned area through security arming and the "go to" function.
CONSOLE 1 AREA: 1
1-2
↓
CONSOLE 1 GLOBAL: 1
0=NO 1=YES
↕
THROUGH
CONSOLE 8 AREA: 1
1-2
↕
CONSOLE 8 GLOBAL: 1
0=NO 1=YES
↑
SET-UP AREAS: THERMOSTATS
To assign thermostats to specific areas, from the Set-up Areas menu, press the 5 (TEMP) key.
Thermostats can be set up so that they can only be controlled from a specific area or from all areas. PESMs and Temperature
Sensors can only be controlled from a single area, as specified in SETUP AREAS.
THERMOSTAT
1 AREAS:
1 2 0=CLR
↓
THROUGH
THERMOSTAT 4 AREAS:
1 2 0=CLR
↑
SETUP AREAS: MESSAGES
To assign messages to specific areas, from the Setup Areas menu, press the 8 (MSG) key.