HAI AEGIS 3000 Owner'S Manual Download Page 11 | Manualshive

Page: 11 / 86

background image

Page 3

6- DOWN ARROW

The Down Arrow key is used to scroll through menus and lists. The down arrow is used to scroll down the list from first to last
(for example, when the first program is being displayed, pressing the down arrow will cause the next program to be displayed).

7- UP ARROW

The Up Arrow key is used to scroll through menus and lists. The Up Arrow is used to scroll back through a list (for example, if
you have already used the down arrow to scroll to an item, the Up Arrow will bring you back to a previous item).

8- ' MESSAGE '

The ' MESSAGE ' key is used to play or record a voice message, or to clear a text message from the console.

9- CONSOLE LED

The Console LED is used to indicate whether the security system is currently armed or disarmed. If armed in any security mode,
the LED is set to red. If the system is disarmed, the LED is set to green. The LED flashes when a message is displayed.

10- CONSOLE DISPLAY

The Console Display is used to show the current security mode and to give useful information that will guide you through normal
operations of your Aegis 3000 control and security system.

11- CONSOLE KEYPAD

The Console Keypad is used to enter user codes for arming, disarming, bypassing, and restoring zones. In some cases, the keys
(0-9) are assigned to different functions. From the top-level display, each key functions as a menu choice.

12- CONSOLE BEEPER

The Console Beeper is used to confirm a keystroke, alert user of errors and troubles, and sound upon entry and exit delays.

13- ' * ' KEY

The ' * ' Key is used to cancel and return the display to the previous menu. When you are entering a number, ' * ' will cancel the
previously entered digits and will prompt you to reenter the number.

14- ' # ' KEY

The ' # ' Key is used to enter or confirm a selection. It may also be used to display a menu or to offer you additional choices.

Normal Top-Level Display

In its normal state, the console display will show the day, date, and time on the top line, and the system status on the bottom line.
If all doors, windows, sensors, etc. are closed, no zones are bypassed, and if there are no troubles, the bottom line will show
"SYSTEM OK" as seen below:

Thu Oct 04, 01 4:00 PM

SYSTEM OK

If one of the doors, windows, motion, or other detector connected to the Aegis 3000 is open, or has detected motion, the bottom
line of the display will say, "ZONE NAME NOT RDY".

For example, the display will show, "FRONT DOOR NOT RDY".

If the zone name has not been entered during set up, the display will give the zone number and zone type. This display will
remain for 2 seconds, then the next zone not ready, in trouble, or bypassed will be displayed.

«
...
9
10
11
12
13
...
»

Summary of Contents for AEGIS 3000























































































Reviews:

No comments

Related manuals for AEGIS 3000

Brand: 4-noks Pages: 20

Brand: Nevo Pages: 4

Brand: Planet Pages: 4

Brand: GridConnect Pages: 5

Smart Home Series

Brand: kobi Pages: 127

Brand: X10 Pages: 1

Brand: UbiTech Pages: 9

Brand: THOMSON Pages: 5

Brand: Uponor Pages: 256

MonoLine “L” Joiner Feed MLP1J4

Brand: JUNO Pages: 2

Brand: Savant Pages: 2

Brand: Marmitek Pages: 24

Brand: Marmitek Pages: 8

Brand: Keyestudio Pages: 361

Brand: Heatit Controls Pages: 2

Brand: Bellman & Symfon Pages: 5

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands