68A00-1 Network Digital Video Recorder
Quick Installation Guide
6
4. After selecting Dynamic IP (ADSL or DHCP), enter the Service IP and Service
Password, if desired. Next, enter the Directory server registration information that
is granted by the ISP. The default administrator’s password is
“pass”
. When
completed, press “Set”.
5. When entering the streaming port, be aware that this is the starting port for the
camera. 10 consecutive ports will need to be opened for the camera to operate
properly. When choosing a group of ports to open, always use a starting port
where the last digit is one (e.g. Ports 7011-7020, 7021-7030, 7031-7040 are valid
groups of ports to open).
6. When complete, click the “Restart Server” button. During the time that the
Network Digital Video Recorder is restarting, unplug the crossover cable and
connect the 68A00-1 to the modem, router, or switch using a standard network
patch cable.
7. Upon successfully configuration of the Dynamic IP connection, a “Ready” LED will
be lit on the front panel of the 68A00-1.
8. At this stage, to connect to the 68A00-1, use the following connection method:
http://Network IP Address or Domain Name/ID
For example:
http://www.homeauto.com/HAI
