Programming Features:
The 48A00-1 can be programmed to change some operating parameters to provide maximum flexibility.
To Enter Programming:
1)
Press and HOLD all four buttons simultaneously until the LED begins to flash (approximately 2 seconds).
2)
Press Button 1 (upper left) for a 2 second delay
1
on Button 4 (default) or press Button 2 (upper right) to set
the delay on Button 4 to the programmed delay on all other buttons.
Once you have pressed Button 1 or Button 2, the LED will flash faster.
3)
With the LED flashing, press Button 1 (upper left) for instant transmission on all buttons
2
, press Button 2
(upper right) for a 3/10 of a second delay
1
(default) on all buttons
2
, press Button 3 (lower left) for a 1
second delay
1
on all buttons
2
, or press Button 4 (lower right) for a 2 second delay
1
on all buttons
2
.
The LED will stop flashing to indicate that the unit has exited programming.
1
The delay requires that the button(s) be held for that amount of time before the signal is sent. If you program a
3/10 of a second delay, then the signal will not be sent unless you hold the button(s) for 3/10 of a second to
reduce inadvertent presses.
2
“on all buttons” includes the combination of button presses that are used to activate the 4 additional zones;
however, does not include Button 4 when it is configured for a 2 second delay.
