Document Number: 48I00-1
48A00-1
Installation Instructions
Description:
The 48A00-1 4-Button Keyfob Remote is used to send up to 8 different wireless signals to the HAI 45A00-1
Wireless Receiver to activate automation programs in the HAI controller. Each button, or combination of
buttons, can activate lighting, arm and disarm the security system, operate a garage door, set off a panic alarm,
and many other functions.
Operation:
When you press a button on the Keyfob, a transmission will be sent after a 3/10 second delay. If you wish, you
can program the buttons to have a variety of delays to help avoid accidental transmission. When the signal is
transmitted, the LED will light for conformation that the transmission was sent.
Note:
Button 4 is factory programmed to have a 2 second delay. You must press and hold Button 4 for 2
seconds before it will transmit.
