Caravan Mirror »Super-Huckepack 4«
Congratulations for buying the HAGUS Super-Huckepack4 Caravan mirror. First of all we would like to wish you a happy and
safe trip.
This Super-Huckepack4 is only to be used for caravanning driving.
After uncoupling the trailer, Super-Huckepack4
rear-view-mirrors must be removed.
Manufacturer cannot be held responsible for eventual damages our damage costs as result of wrong or incorrect usage,
bad mounting and/or insufficient maintenance of the product and its parts.
Would there, despite our numerous quality tests, be any complaint(s) on this product or its parts, a maximum guarantee of
2 years after date of purchase is valid (not valid for wastage parts, screws and screw caps, suction pads and rubbers).
Warranty is only valid after approval of the warranty department. Defect product has to be sent back to the manufacturer
or its dealer together with copy of the receipt and/or invoice, clearly mentioning the date of purchase.
Important !
Warranty
Mounting instructions
1) Adjust straps
together with hook
and hook in to the mirror frame
.
2) Hook in the mirror bar
with mounted hooks
and
at the mirror frame
3) Hooks
and
to be placed in the corners of the mirror frame
4) Mirror bar
to be adjusted as far as possible outwards.
5) Hooks
and
to be firmly screwed.
6) Remove caravan mirror and adjust strip
together with hook
to ensure a high tension when finally mounted.
7) Clean door of the car.
8) Moisten slightly piston
and push plastic triangle on the door side. (Att.: Please make sure pistons are put on smooth
surfaces).
Attention: middle part of the triangle has to be in vertical position (see drawing).
9) Adjust caravan mirror
into driving position.
10) Adjust screws and nuts sufficiently.
Spare parts available at your Hagus dealer:
Ê
Ë
Ì
Í
Î
Ï
Ì
Î
Ï
Ì
Í
Î
Ï
Ê
Ë
Ð
.
.
Spare parts
11
Content
- 2psc. mirror bar with mounted
accessories and mirror
- 2psc. plastic triangle
- 2psc. screws M6 for
and
- 2psc. nuts M6 for
and
- 4psc. screws Ø3mm for
and
- 6psc. pistons
- 4psc. mounting hooks
Ñ
Ò
Ñ
Ò
Î
Ï
Ò
11
Pre mounting
Remark: Do not tighten screws too fast!
1. Pistons
to be mounted in the backside
of the plastic triangle.
2. Connect mounting hook
at the middle
of the plastic triangle
. Push mounting
bar
over hook
and screw on nuts
and screws.
Ò
Ó
Ñ
Ò
11
9665
Tension strap (kit 2 psc)
9591 – Mirror L/R
9661
Hook for mirror bar
(kit 4 psc)
9668
Support, complete
9669
Suction element
(kit 10 psc)