2-9
SECTION 2 –
SAFETY AND PRECAUTIONS
Inspection and Replacement
Follow the manufacturer’s
recommendations on inspection and
replacement.
FIRST AID KIT
A First Aid Kit (located beneath the
operator’s seat) is provided for your
convenience.
NOTE: Keep an accurate inventory of
supplies in the First Aid Kit and
dispose of any item(s) that have
expired.
ROLL-OVER PROTECTION
STRUCTURE (ROPS)
The cab on your machine is featured with
a Roll-Over Protection Structure (ROPS),
which is intended to protect the operator from
injuries caused by machine rollovers.
The following ROPS certification decal
(located inside cab on the rear right-hand
b-post) indicates that your cab has met
specific testing requirements and is
compliant with Occupational Safety and
Health Administration (OSHA) and
International Organization for
Standardization (ISO) regulations.
NOTE: The ROPS/Vehicle Test Weight listed
on the certification decal is the
maximum overall weight (including
machine, solution, and attachment)
allowed to be compliant with ROPS
testing.
NOTE: The ROPS is non-compliant with use
of the 60-ft. Nitrogen Tool Bar.
Fire Extinguisher
(Located along the platform
on left-hand side of machine)
-Typical View
• Security
Latch
First Aid Kit
(Located beneath the operator’s seat)
-Typical View
NOTICE
The addition of optional equipment on
your machine may increase the ROPS
maximum overall weight. If this weight
exceeds the vehicle test weight, the
ROPS becomes non-compliant.
ROPS Certification Decal
(Located inside cab on
the rear right-hand b-post)
Summary of Contents for STS12i Combo
Page 276: ......
