50/72
Hägglunds Fusion Drive system
| Maintenance and repair
Bosch Rexroth AB, RE 15345-WA Version 11.2022,
8.5 Hägglunds BICA Brake
Its important to bleed the brake before start up. For more infomation see
.
9 Maintenance and repair
9.1 Maintenance log
We recommend that a maintenance log is kept to record service/maintenance/
repair, addition and alteration of the equipment. Each note, observation or
comment should be dated.
9.2 Preventive maintenance
Common
The maintenance of hydraulic systems is designed to prevent failure of the system
and to keep the system running efficiently to specification. The specific procedures
will depend on the nature of the equipment, the environment it is working in and
the duty cycle, bearing in mind the consequences of a breakdown. To optimize
the maintenance intervals economically a Life Cycle Cost (LCC) analysis is
recommended.
Follow the
during the checks.
The panels covering the drive system can be dismounted by opening the lever
latches or removing the M8 nuts to simplify the access to the components inside
the unit.
CAUTION
Drop of panels
Risk of injury.
f
Use two persons when lifting the panels if weight is more than 20 kg (44 lb).
Daily checks, first week after commissioning
Fluid leaks
Fluid level in the tank
Operating temperature
System pressure
System performance and general condition
Unusual noises
Contamination indicators on the filters
Pre-start checks (even daily)
Fluid leaks
Fluid level in the tank
