hager XEV1R22T2 Series, Operating Instructions Manual

Page: 10 / 14

s s
10
Appendix
Maintenance and care instructions
witty charging station
LED display Signal Causes Solutions
− The electric vehicle is being charged in emergency
operation.
[3]
•
Find the cause of the fault and remedy it.
•
Contact the vehicle dealer if necessary.
2 x
[6]
− There is a local communication problem with the
Ethernet/WiFi
− There is no connection to the energy management
controller (EMC) flow
[3]
•
Check the network connections.
•
Ensure that a DHCP router is available in
the network.
•
Reconnect the charging station to the
EMC flow (see the XEM470 guide or flow.
hager.com).
[3]
Table 2: LED displays for faults
[2]
Mode 2 TE/TF socket outlet, version-dependent and not available in all markets. The additional socket outlet must only be used to charge batteries for bicycles
or scooters, for example.
[3]
Not applicable to all charging stations (version-dependent)!
[6]
LED signalling varies, version-dependent!
04.02 Maintenance and care instructions
Qualified electrician
Electrical devices may only be installed, assembled, repaired and dismantled by a trained
and certified qualified electrician in accordance with the relevant installation standards,
guidelines, regulations, directives, safety and accident prevention regulations of the coun-
try.
The charging station is maintenance-free.
However, we recommend the following approximately once a year:
•
Check the housing of the charging station for defects and external damage.
If you find any damage, stop using the device for charging and contact a qualified electrician.
•
Clean the housing with a dry or slightly damp cloth.
•
With the charging cable disconnected, clean the charging cable and dirty contacts with a dry
cloth.
Maintenance instructions
Never use harsh cleaning agents, water or steam jet cleaners, and never submerge the
charging cable in liquids.
•
Check that the residual current circuit breaker is functioning correctly (see device instructions).
•
Check the electrical switching and safety equipment in the house distribution board for visual de-
fects.