background image

6LE002975A

4

5. Technical data

Number of pulses

Type of fault 

Cause

1

Charging cable fault 

Defective or incompatible cable (13A) 

2

Defective communication 

Defective cable - short-circuit during communication

3

Electric vehicle is overcharged 

The EV does not comply with the power limit set by the station 

4

Ventilation required 

The vehicle requires additional ventilation (the charging is 

blocked) 

5

Fault in charge management 

The load shedding is too frequent during charging (4x) and the 

power supply to the house is not sufficient 

6

Defective communication 

Defective cable -  problem at the diode

Steady

Configuration prohibited

Environmental conditions

Temperature 

-25°C to +40°C

Humidity 

5% to 95%

Protection 

IP 54 – IK 10

Electrical characteristics

Voltage

230V / 400V (3-phase Version) +/- 10%

Frequency 

50 Hz +/- 1%

Maximum power load 

32A - 7kW (1-phase Version) 

32A - 22kW (3-phase Version)

Class of electrical protection

Class 1

RFID

Compatible RFID technologies 

Mifare 1k

Mifare 4k

Mifare Ultralight NTAG203

4. Malfunction

Indicator light: flashing red

6. Precautions for assembly

All information pertaining to the installation 

(assembly, electrical connection and 

configuration), connection to the servers as well 

as the use and maintenance of the terminals 

are provided in the USB key provided with the 

terminals and on the Hager website of your 

country.

Please refer to the maintenance manual 

before starting the installation of the 

charging station. This device is to be 

installed only by a professional electrician 

fitter according to local applicable 

installation standards. Conform to TBTS 

installation rules.

Usable in all Europe 

M

 and in Switzerland

Correct Disposal of this 

product

(Waste Electrical & Electronic 

Equipment).

z

(Applicable in the European Union and other 

European countries with separate collection systems).

This marking shown on the product or its literature 

indicates that it should not be disposed with other 

household waste at the end of its working life. To prevent 

possible harm to the environment or human health from 

uncontrolled waste disposal, please separate this from 

other types of wastes and recycle it responsibly to 

promote the sustainable reuse of material resources.

Household users should contact either the retailer where 

they purchased this product, or their local government 

office, for details of where and how they can take this 

device for environmentally safe recycling.

Business users should contact their supplier and check 

the terms and conditions of the purchase contract. This 

product should not be mixed with other commercial 

wastes of disposal.

Hager Group - Tehalit GmbH - Seebergstraβe 37 - DE-67716 Heltersberg 

 

 

 

 

   

           Hager 09.17 - 

Summary of Contents for witty park XEV6 Series

Page 1: ...arging station Strip light RFID Card Reader Socket Mode 3 Type 2S Socket Mode 2 Energy meter version specific Optional base 3 Using the charging station The display module will inform you about the status of the station and the charge off Station is powered off solid green Ready for charging or fully charged pulsating white Authorisation request slowly flashing green white Authorisation OK slowly ...

Page 2: ...ndicator light flashing white Connect the vehicle end and station end cable lock the cable Charging begins The vehicle does not need more energy Indicator light pulsing green Indicator light solid green Wait for the exterior signal Indicator light flashing green START card connection charge Smartphone alternative Scan the QR Code with a Smartphone ...

Page 3: ...hing white green Disconnect the vehicle end and station end cable Wait for a maximum of 3 seconds Indicator light steady green STOP disconnection Hold the badge in front of the reader Or Stop the charging from a Smartphone unlock the cable card Or Remove the cable if the station is configured in Free Release ...

Page 4: ...he terminals are provided in the USB key provided with the terminals and on the Hager website of your country Please refer to the maintenance manual before starting the installation of the charging station This device is to be installed only by a professional electrician fitter according to local applicable installation standards Conform to TBTS installation rules Usable in all Europe M and in Swi...

Reviews: