hager univers FW Manual Download

Page: 112 / 136

Accessories for internal fittings
Universal accessories in detail

110

Technical changes reserved

7.2.5

Cable clips M7240 for lateral cable duct

4 cable clips are supplied with every FWU enclosure for attaching cables in the
side cable duct (see page 25).

If more than 4 parts are required, accessory set M7240 with 10 parts can be
ordered separately.

Assembly

Mounting the cable clips from accessory set M7240

Important note

: The cable clips in accessory set M7240 are grey. They look very

similar to the black clips from the Tehalit LFH cable entry system 60 mm (M7239).
However, these black LFH clips are designed slightly differently and cannot be

mounted into the FWU enclosure. Pivoting these parts (“C” in figure

1) can

damage the plastic guide in the side part of the cabinet (figure 3).

Summary of Contents for univers FW









































































































































Search results

Summary of Contents for univers FW

Reviews:

Related manuals for univers FW

Brands by name

Popular brands

hager univers FW, Manual

Search results

Summary of Contents for univers FW

Reviews:

Related manuals for univers FW

Brands by name

Popular brands