4
TJA670 domovea Basic
TJA470 domovea Expert
1 INTRODUCTION
1.1 Purpose of the document
The purpose of this document is to familiarise the domovea server installer with the configuration interface. This
document sets out the steps for the installer to perform this configuration. To do this, the following conditions are
generally required:
-
the physical installation must be carried out,
-
the server must be connected to the Internet via a router with the DHCP server function activated,
-
the installer must be equipped with a mobile device (smartphone, tablet, PC) connected to the same network
as the server,
-
the installer must have a company account on the myHager portal.
Note: We strongly recommend the installer has their own DHCP router (Wifi + 3G/4G) to perform the configuration and
tests on the system locally (via Wifi) or over the Internet (via 3G/4G).
1.2 General information on the KNX installations
A KNX installation is an electrical installation in which products communicate between themselves via a wired bus or
radio to send or receive commands.
A KNX installation comprises different types of products that can be classed:
-
According to their connection with the KNX bus:
-
Wired products: they are connected to the KNX bus by a cable that meets the KNX specifications.
-
Radio products: they are connected to the bus by a radio connection that meets the KNX radio
specifications. The radio communication can be:
a) One-way: the products are senders only.
b) Two-way: the products are both senders and receivers.
-
According to their function in the installation
-
Input products: they send commands (push-buttons, switches, motion detectors, etc.). An input
product can have several input channels: push-buttons with several switches, etc.
-
Output products: they receive commands and activate the connected applications (lighting, roller
shutters, etc.). An output product can have several output channels: lighting output module with 6
channels to run 6 lighting circuits, etc.
-
Systems products: they are necessary for the correct operation of the installation: power supply to the
bus, wired bus/radio bus media coupler, etc.
