134
GB
Menu
Setting
possible
Using the setting
NAME
ACCESS 1
KEYPAD 1
KEYPAD 2
Factory:
• ACCESS 1 for
1st access,
ACCESS 2 for
2nd, etc.
• KEYPAD 1 for
1st key,
KEYPAD 2
for 2nd, etc.,
as described in
the table on the
next page
BACK-
LIGHTING
ON ACTION
NIGHT MODE
ACTIVE
Can be used to define the outdoor caller unit backlighting
operating mode.
If the controller is connected to an external power supply or
a solar panel
, you can select the following depending on the
type of outdoor caller unit:
Can be used to modify a name given to an access
or to a call button (8 characters max.).
1.
Select the name to be modified.
2.
Modify the 1
st
character
using the keys
.
3.
Move on to the next character
using the key
.
4.
Perform steps 2 and 3 for all the characters and then, once
the desired name has been programmed, press
.
C
C
The
key selects the previous character.
IMPORTANT: if a power cut occurs and the controller has battery back-up, backlighting is activated when a
button is pressed or a badge used.
If the controller is powered by a solar panel, ACTIVE must be selected. Backlighting will be enabled when a
button is pressed or a tag used.
IMPORTANT: the KEYPAD 1/KEYPAD 2 menu is only displayed if the
2 outdoor caller unit call buttons have been programmed to be
recognised by the same handset.
11.4 Modifying the display options
NAME
BACKLIGHTING
Handset display
in standby mode
RADIO LINK
HANDSET
ACCESS
TAGS
PIN
DISPLAY
SOUNDS
PARAMETERS
PULSE
INFOS
MHF03X / MHF04X
MHF01X
MHF05X / MHF06X units
MHF02X units
ACTIVE
ACTIVE
Backlighting is activated 24 hours/day
NIGHT MODE
Backlighting is activated at night time
ON ACTION
ON ACTION
Backlighting is activated when a button
is pressed or a tag used
