Before you can use this application you need to configure your remote-controlled socket (see chapter on
“Operating options”
).
Activating an electrical device
Deactivating an electrical device
• Light ON
• Relay 1 ON
• Relay 2 ON
• Relay 3 ON
• Relay 4 ON
Command to be sent
• Light OFF
• Relay 1 OFF
• Relay 2 OFF
• Relay 3 OFF
• Relay 4 OFF
1
2
3
4
5
6
7
8
9
0
1
2
3
4
5
6
7
8
9
0
)
)
)
)
)
Telephone
network
For this application and for local control, the remote-controlled socket cannot be operated using
a keypad with touch screen or using the keys programmed for Toggle Switch or Timer mode.
93
Introduction
G
B
Remote Control application
•
Control a 230 V electrical appliance when away from home using a fixed
or mobile phone via the control panel with telephone dialler.
•
Control a 230 V electrical appliance in Arm/Disarm mode when at home
using a keypad or remote control device via the control panel
(on condi-
tion that the keys are programmed for the same remote control func-
tion)
.
The control panel must
be programmed for
recognition by the remote-
controlled socket for this
application. To programme the
remote-controlled socket to be
operated by a different remote
control unit, the original control
panel programming must be
deleted as described in the
chapter on “Return to factory
configuration”.