238
GB
3.
To ensure the
controller is watertight,
all the grommets must
be positioned and
locked into place the
right way round.
4.
Use the cable clamp
and screws provided
to lock the cables in
place.
Pozidriv 2
2.
When powered, the outdoor caller unit lights up and beeps every 2 sec. The radio link
creation LED also lights up red for 2 sec.
If this is not the case, check that the controller’s batteries or external power supply are
properly connected.
If the radio link creation LED flashes three times
every 5 seconds:
- remove the controller’s power supply,
- check the outdoor caller unit wiring,
- reconnect the controller’s power
supply,
or
- the battery is not connected.
Check is it inserted
and/or connected.
Mr et Mme Evêque-Mourroux
“BEEP”
3.5
• Solar panel
Connect a 12 V/8 W min. power solar panel (ref. MJU01X
on price list) to terminal blocks 1 and 2 on the controller.
There are no polarities to be respected on these terminals.
IMPORTANT: 908-21X
battery must be installed
for current-based
applications. Connect the
battery supplied to the
connector.
Do not loosen the
cable clamps.
Summary of Contents for MHF01X
Page 19: ...4 Pozidriv 2 6 3 5 230 GB...
Page 20: ...7 8 9 3 5 231 GB...
Page 71: ...282...
Page 72: ...283...
