Hager Electro S.A.S., Boulevard d'Europe, B.P. 3, 67215 OBERNAI CEDEX, France - www.hager.com
OCOM 117524
Hager 02.2020
6
6LE007146A
Can be used anywhere in Europe
M
and Switzerland
•
Return to product factory configuration
: to return
to the product factory configuration, i.e. delete all
programs and all settings changed.
Press
ok
to confirm and return to the
Changing
Settings
menu.
RETURN TO
PRODUCT FACTORY
CONFIGURATION
CHANGE
SETTINGS
RESET
RF LINKS
RESET
BLE
RETURN TO
PRODUCT FACTORY
CONFIGURATION?
NO
YES
Using keys
3
⁄
4
, select
NO or YES
ABOUT
The
About
menu displays the following information:
• the product reference;
• the version of the embedded software;
• the version of the microcontroller;
• the version of the startup program;
• the unique Bluetooth
®
identifier seen through the
mobile device / PC.
Press
ok
to return to the
Settings
menu.
RF
LINKS
ABOUT
CHANGING
SETTINGS
LANGUAGE
BACKLIGHT
CONTRAST
–––––
REF
EGN400
EFR32
V2.0.1
STM32
V1.0.10
BOOT
V---
RF LINKS
RF
LINKS
ABOUT
CHANGING
SETTINGS
LANGUAGE
BACKLIGHT
CONTRAST
–––––
The
RF Links
menu is used to associate an output
(or outputs) of the clock (receiver) with one or more
Quicklink comfort products (20 or 40 transmitters
depending on model) via an RF link.
This menu is accessible if a comfort
product (transmitter) is in configuration
mode.
To associate a comfort product:
• Start the configuration procedure on the comfort
product (transmitter) by pressing the
cfg
button on
it;
• Select the input or the push button to configure the
transmitter (for more information, see the quick
link
configuration manual).
• Select an output available on the clock (receiver):
OUTPUT D
*
OUTPUT C
OUTPUT B
*
RF LINKS
OUTPUT A
* The symbol displayed indicates
if the outlet is already associated
with a comfort product.
Select the function to configure:
• No function (Pas de fonction): deletes a function
• Contactor (Télérupteur): reverses the status of the
output each time it is pressed
• ON: enabled output
• OFF: disabled output
• Scene 1 (Scène 1): scenario 1 function (press and
hold OK to enable the scene)
• Scene 2 (Scène 2): scenario 1 function (press and
hold OK to enable the scene)
• Timer ON (Minuterie ON): output enabled for an
adjustable period from 1 s to 24 h (press and hold
OK to set the timer duration)
• ON/OFF Switch (Inter ON/OFF): command to
enable or disable the output
• Forçage ON: forcing enabling of output
• Forcing OFF: forcing disabling of output
NO FONCTION
OUTPUT A
CONTACTOR
ON
OFF
SCENE 1
SCENE 2
SWITCH ON/OFF
FORCING ON
FORCING OFF
Press
ok
to confirm and return to the
RF Links
menu.
Confirm the configuration on the comfort product
(transmitter) by briefly pressing the
cfg
button on it.
Update
The firmware is updated via the configuration app.
A new version of the clock firmware is
offered when:
• the app is started on your mobile
device;
• the mobile device and clock are
connected via Bluetooth
®
.
Battery Failure
If the main power supply is not available and the
product is running on the battery, the following
message is displayed:
• if the battery level is low
OK
Low battery!
The product switches to standby mode
within 5 minutes after the message is
displayed if neither of the 2 keys
(
ok
or
) is pressed.
• if the battery level is critical
Critical battery
level!
The screen turns off and the product stops
working a few seconds after the message
is displayed. It will no longer be possible to
configure the product when it is off (screen
off on battery).
The Bluetooth
®
word mark and logos are registered
trademarks owned by Bluetooth SIG, Inc. and any use
of such marks by Hager is under license. Other trade-
marks and trade names are those of their respective
owners.
Hager Controls hereby declares that this
EGN200 and EGN400 Time Switch radio
equipment complies with the essential
requirements and other relevant provisions of
Directive 2014/53/EU.
The EC declaration can be consulted
on the website:
www.hager.com
How to dispose of this product
(waste electrical and electronic equipment).
a
(
Applicable in European Union countries and other
European countries with selective waste collection
systems
).
This symbol on the product or its documentation indicates
that it must not be disposed of with other household
waste at the end of its life cycle. As disposing of waste
inappropriately may harm the environment or human
health, please separate it from other types of waste and
recycle it responsibly. In this way you will contribute to the
sustainable re-use of material resources.
Individuals should contact the retailer who sold them the
product or contact their local council to fi nd out where
and how they can dispose of this product for recycling in
an environmentally-friendly manner.
Companies should contact their suppliers and read the
terms of their sales contract. This product must not be
disposed of with the other commercial waste.