hager Cookguard Operating & Assembly Instructions Download Page 23

Appendix

Accessory

Note: 
Should it not be possible to eliminate a problem immediately, the cooker can be used
temporarily for 1.5 hours at any time, by removing the batteries from the sensor unit and
switching the fuses for the cooker off for 10 seconds and then switching them on again. In
this emergency mode, the protection function is not available!

6.3

Accessory

Water leakage sensor

WXH202

KNX radio binary input 2-gang flush-mounted

TRM702A

KNX radio binary input 2-gang flush-mounted 230 V

TRB302B

„Hager cookguard with Safera technology inside“

6.4

Disposal information

Correct Disposal of this product (Waste Electrical & Electronic Equipment).

(Applicable in the European Union and other European countries with separate collection systems).

This marking shown on the product or its documentation indicates that it should not be disposed of with other household

waste at the end of its working life. To prevent possible harm to the environment or human health from uncontrolled waste

disposal, please separate this device from other types of waste. Recycle the device responsibly to promote the sustainable

reuse of material resources.

Household users should contact either the retailer where they purchased this product, or their local government office, for

details of where and how they can take this device for environmentally safe disposal.

Business users should contact their supplier and check the terms and conditions of the purchase contract. This product

should not be mixed with other commercial waste for disposal.

6.5

Battery disposal

Immediately remove empty batteries from the device and dispose of in an environmentally acceptable manner.

Do not throw away batteries in household waste. The local authorities provide information about environmen-

tally friendly disposal. According to statutory requirements, the end consumer is obliged to return used batter-

ies.

6.6

EU Declaration of Conformity

Hereby Hager Electro GmbH & Co. KG declares that the radio system type Cookguard WXH231/
WXH212 is in compliance with the directive 2014/53/EU. The complete text of the EU declaration of
conformity is available at the following Internet address: hager.com. hager.com

23

Summary of Contents for Cookguard

























Reviews: