7/16"
11.4
2"
50.8
2 3/4"
69.9
1"
25.4
A
1/2"
12.7
2 3/32"
53.3
3/8"
9.5
HINGE
PIVOT
FRAME STOP
DOOR
1. MARK AND DRILL HOLES (RIGHT HAND SHOWN)
3 1/8"
79.4
4"
101.6
4"
101.6
4"
101.6
3/4"
19
5/16"
7.9
2 11/16"
68.3
1 1/4"
31.8
B
5/16"
7.9
12"
304.8
FRAME
STOP
Prepare these 4 holes for
standard installation of closer
to door without drop plate.
Prepare these 4 holes for
5922 or 5923 drop plates only.
X
Prepare these 4 holes for 5918
drop plate only.
5200 DOOR CLOSER PREP. (RIGHT HAND SHOWN)
5300 DOOR CLOSER PREP. (RIGHT HAND SHOWN)
3"
76.2
1 1/2"
38.1
1 5/16"
33.3
4"
101.6
7"
177.8
B
1 1/2"
38.1
9 1/16"
230
C
1/2"
12.7
3/4"
19
FRAME STOP
O
Prepare these 4 holes for standard
installation of closer body to door without
drop plate.
X
Prepare these 4 holes for 5915
or 5916 drop plate only.
Dim. “A”
Dim. “B”
Door Opening
with Stop
Door Opening
w/o Stop
10"
4-1/2"
90°
105°
8-3/4"
3-1/2"
100°
105 - 130°
7-1/2"
2"
110°
130 - 170°
Dim. “A” Dim. “B” Dim. “C”
Door Opening
with Stop
Door Opening
w/o Stop
10"
8-1/8"
9-1/8"
90°
105°
8-1/2"
6-1/2"
7-1/2"
100°
105 - 130°
7-1/2"
5-7/16"
6-7/16"
110°
130 - 170°
Locate the arm and degree of opening for this installation.
Use the chart below to mark/drill/tap (4) 1/4-20 holes for the
door. Also, mark/drill/tap (5) 1/4-20 holes in the frame soffit
and/or rabbet.
5906 Extra Heavy Duty Hold Open Stop Arm,
5956 Heavy Duty Cushion Stop Arm &
5907 Extra Heavy Duty Stop Arm:
5911 Extra Heavy Duty Arm & 5912 Extra Heavy
Duty Hold Open Arm:
Dim. “A”
Dim. “B”
Dim. “C”
Door Opening
8-7/8"
6-7/8"
7-7/8"
up to 120°
7-3/16"
5-1/8"
6-1/8"
up to 180°
Dim. “A”
Dim. “B”
Door Opening
8-15/16"
3-7/16"
up to 120°
7-3/16"
1-3/4"
up to 180°
Drop Plate Part #
Minimum Top Rail
Closer
5915 & 5916
3"
5300
5918
4"
5200
5922 & 5923
2-1/2"
5200
5200 CLOSER MOUNTING CHART
5300 CLOSER MOUNTING CHART
5200 CLOSER MOUNTING CHART
5300 CLOSER MOUNTING CHART
*This table was made using 4 1/2" wide hinges. Use of larger hinges or swing
clear hinges will yield different results.
**Only use Dim “C” if using a drop plate.
Drop plate may be needed in special situations.
REV: 2
REV DATE: 11/04/2020
Page 2 of 6
Installation Instructions
I-CL00191 Rev 2
5906,5907,5911,5912, 5956 Heavy Duty Parallel Arm
