LATCH LOCKING CAM
LATCH LOCKING CAM
CAM KEYWAY SHOULD FACE
LOCK EDGE OF DOOR
LATCH LOCKING CAM
CAM KEYWAY SHOULD FACE
LOCK EDGE OF DOOR
3670 LEVERSET
USING A SCREWDRIVER, ROTATE THE CAM
1.
CLOCKWISE UNTIL THE CAM PROFILE LOOKS
LIKE THE PICTURE ON THE LEFT.
INSERT THE KEY INTO THE CYLINDER AND
2.
ROTATE THE TAILPIECE 90 DEGREES
CLOCKWISE.
HOLD THE KEY IN THE POSITION FROM STEP
3.
2 AND INSTALL THE LEVER UNTIL IT SNAPS
INTO PLACE.
USING A SCREWDRIVER, ROTATE THE CAM UNTIL
1.
THE KEYWAY FACES THE LOCK EDGE OF THE
DOOR.
INSERT KEY INTO THE CYLINDER AND ROTATE
2.
THE KEY 90 DEGREES SO THE TAILPIECE
MATCHES THE CAM PROFILE.
HOLD THE KEY IN THE POSITION FROM STEP 2
3.
AND INSTALL THE LEVER UNTIL IT SNAPS INTO
PLACE.
REPEAT STEPS 1-3 FOR THE OPPOSITE SIDE OF
4.
THE LOCK.
3470/3570/3473/3573/3579 LEVERSET
3495 LEVERSET
USING A SCREWDRIVER, ROTATE THE CAM UNTIL
1.
THE KEYWAY FACES THE LOCK EDGE OF THE
DOOR.
INSERT KEY INTO THE CYLINDER AND ROTATE
2.
THE KEY 90 DEGREES SO THE TAILPIECE
MATCHES THE CAM PROFILE.
HOLD THE KEY IN THE POSITION FROM STEP 2
3.
AND INSTALL THE LEVER UNTIL IT SNAPS INTO
PLACE.
3470/3473/3495/3570/3573/3579/3670 LEVERSET TIMING INSTRUCTIONS
REV: 08
DRAWING NO: I-LS00310
SHEET 1 OF 2
HAGER COMPANIES
139 Victor Street, St. Louis, MO 63104 - (800) 325-9995 - Fax (800) 782-0149
