www.hager.com
Safety instructions
Electrical equipment must only be installed and assembled by a qualified
electrician in accordance with the relevant installation standards, regulations,
directives and safety and accident prevention directives of the country.
Failure to comply with these installation instructions may result in damage to
the device, fire or other hazards.
Function
Mechanical light switches for electrical installations in buildings.
Correct use
-
For the flush-mounted installation in standard wall boxes
(recommended wall box depth ≥ 35 mm).
-
Only suitable for use in indoor areas with no drip and no spray water.
Technical data
Rated voltage:
250 V~
Frequency:
50/60 Hz
Conductor cross-section of screw terminals:
max. 3 x 1.5 mm²
Distance of fixing holes:
60.3 mm
Switch compliance:
BS EN 60669-1, IEC 60669-1
16AX switches 1way/2way
Rated current:
max. 16 AX
10AX intermediate switch
Rated current:
max. 10 AX
16AX switches 1way/2way
10AX intermediate switch
Hager Dream
Installation manual
