2 8
3.
Input the first digit, the second starts flashing, etc.
e.g.: to set the clock as shown above, the following input must be
entered: 1, 2, 4, 5 in this order.
Press OK to store the hour, on the screen appears "SET DAY" followed
by the day that is actually stored.
4.
With the scroll down key, the choice is made for the actual day and you
confirm with the OK key. A confirmation beep is heard and the setting is
stored.
Returning the base's settings to the defaults
By resetting the base's settings, all settings return to the values they were
set to, when the unit left the factory (see page 8 "Default settings").
1.
Press the key MENU, and then three times on the scroll down key. The
screen displays "SETTING". Confirm with OK and press the scroll down
key once more, on the screen appears "BASE SETTING".
2.
Press OK and then scroll down twice, on the screen appears
"DEFAULT SETTING". Press OK and on the screen is displayed the
question to confirm: "CONFIRM DEFAULT SETTING?".
3.
To store your choice, press OK. A confirmation beep is heard, the
setting is stored and on the screen appears "DEFAULT SETTING
DONE" during five seconds.
Changing the dialing mode
Two dialing modes are available:
-
tone - presently the standard
-
pulse - only needed for old installations
1.
Press the key MENU, and then three times on the scroll down key.
2.
The screen displays "SETTING". Confirm with OK.
3.
Press the scroll down key once more, on the screen appears "BASE
SETTING". Press OK and three times scroll down.
SET TIME
12:45
